Aussie Owned & Operated

Pre-Made Kits to suit every application

Our Service Difference


Victron VE.Direct to VE.Can Interface

$465.27 (inc. GST)

The Victron VE.Direct to VE.Can Interface is a device that enables communication between Victron Energy products that use VE.Direct communication protocol and products that use VE.Can communication. VE.Direct is a proprietary communication protocol used by Victron Energy products, while VE.Can is a communication protocol used in some of their newer products, such as the Lynx Ion + Shunt and the Skylla-i battery charger.

SKU: ASS030520410 Categories: ,

Victron VE.DIRECT to VE.CAN:

The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.



•The interface cable does not work with other VE.Direct products, such as Solar Chargers, Inverters and also not with the BMV-712 Smart.

•When used in combination with a BMV-702 there is limited functionality with regards to the AUX function in the BMV: When used to measure starter battery voltage, that voltage will be transmitted to VE.Can. But when used to measure temperature and or mid-voltage, that data will not be transmitted on the VE.Can network.

Additional information

Network Type

NMEA 2000

Network Requirements

In conformance with NMEA 2000. Details are available from NMEA 2000 network suppliers.

Network Connector

Micro-C / M12 / DeviceNet male.

Canbus Supply Voltage Range

7V -70VDC

Canbus Current Draw – typical

15mA at 12VDC

NMEA2000 Load Equivalent Nr.


Operating temp. Range

-20 – +50°C

Measurements body

70 x 50 x 20mm


100 gram


Manual-BMV-NMEA-2000-EN (1)Victron ASS030520410 manual-