Aussie Owned & Operated

Pre-Made Kits to suit every application

Our Service Difference


Cyrix-Li-ct 12/24V-230A intelligent Li-ion battery combiner

Original price was: $275.22.Current price is: $250.20. (inc. GST)

The Cyrix-Li-ct 12/24V-230A intelligent Li-ion battery combiner is a device designed for use in DC battery systems with lithium-ion batteries. This device is specifically designed to combine the charging current from multiple sources, such as a solar panel and a generator, to charge a single battery bank.

SKU: CYR010230412 Categories: ,

Victron Cyrix Li-ct combiner:

The first line of protection is cell balancing. All Victron LiFePO4 batteries have integrated cell balancing. The second line of protection consists of:

-shut down of the load in case of imminent cell under voltage, and

-shut down or reduction of the charging current in case of imminent cell over voltage, high temperature (>50°C) or low temperature (<0°C).

The VE.Bus BMS is the core of the second protection line. However, not all loads or chargers can be controlled directly by the VE.Bus BMS. In order to shut down such loads or chargers several VE.Bus BMS controllable Cyrix switches are available.


Cyrix-Li-load- The Cyrix-Li-load will disengage when its control input becomes free floating. If the battery voltage recovers after disconnection (which will happen when no other loads are connected to the battery), the output of the BMS will become high and the Cyrix will reengage after 30 seconds. After 3 attempts to reengage, the Cyrix will remain disengaged until battery voltage has increased to more than 13 V (resp. 26 V or 52 V) during at least 30 seconds (which is a sign that the battery is being recharged). Alternatively, a BatteryProtect can be used (advantage: very low power consumption).


 Cyrix-Li-Charge- The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:

-if the charge disconnect output of the VE.Bus BMS is high, and

-if it senses 13,7 V (resp. 27,4 V or 54,8 V) or more on its battery charger connection terminal, and

-if it senses 2 V or more on its battery terminal (the Cyrix will remain open if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. After 2 attempts to reengage with 3 seconds delay, the delay increases to 10 minutes. Whenever battery voltage is less than 13,5 V (resp. 27 V or 54 V), the Cyrix will disengage with a delay of 1 hour.

Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V.

Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7 V or more, the Cyrix will reengage, with 3 seconds delay.


Cyrix-Li-ct- The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery:

-if the charge disconnect output of the VE.Bus BMS is high, and

-if it senses 13,4 V (resp. 26,8 V) or more on one of its power terminals.

The Cyrix will disengage immediately:

-when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or

-when battery voltage drops below 13,2 V.

Start assist function: a short positive pulse will close the relay during 30 seconds. A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature.


LED status indication:

LED on: engaged                                                           LED 10 s flash: disengaged

LED 2 s flash: connecting                                              LED 2 s blink: disconnecting

LED 0,25 s blink: alarm (over temperature; voltage > 16 V; both batteries < 10 V; one battery < 2 V) (multiply by two for 24 V)

Additional information

Cyrix Battery Combiner

Cyrix-Li-ct 12/24-230

12 V system

24 V system

Continuous current and breaking capacity at 12 V or 24 V

230 A

Breaking capacity at 48 V

n. a.

LED status indication


Control cable

Included (length 1 meter)

Control input

The Cyrix engages when the control input is high (appr. Battery voltage)

The Cyrix disengages when the control input is left free floating or pulled low

Connect voltage

13,4 V < V < 13,7 V: 120s

13,7 V < V < 13,9 V: 30s

V > 13,9 V: 4 s

26,8 V < V < 27,4 V: 120s

27,4 V < V < 27,8 V: 30s

V > 27,8 V: 4 s

Disconnect voltage

13,3 V < V < 13,2 V: 10 s

V < 13,2 V: immediate

26,6 V < V < 26,4 V: 10 s

V < 26,4 V: immediate

Current consumption when open

<4 mA

Protection category


Weight kg (lbs)

0,27 (0.6)

Dimensions HxWxDin mm (hxwxd in inches)

65 x 100 x 50
(2.6 x 4.0 x 2.0)


Datasheet-Cyrix-Li-ion-230-A-ENVictron Cyrix Li-ct combiner 12/24V-230A spec sheet-